MBM Brakes Rear GM 1955-1968 Full Size 10/12 Bolt Pattern Disc Brake Conversion Kit Standard Rotors-Fast Shipping

Description

1955-1968 GM Full Size 10/12 Bolt Rear End Disc Brake Kit

Complete Rear Disc Brake Conversion Kit Includes:

11″ GM Rotors Multi Pattern

Fits 5×4.75″ w/ 7/16 Studs & 5×4.5″ w/ 1/2 Studs

Large GM Calipers w/ Self Adjusting E-Brake (1979 Cadillac El Dorado)

D54 Pads Included

Caliper Brackets & Spacers

Bracket Hardware

Flex Hoses & Clips

Emergency Brake Cables

Tech Notes:

Does not fit S-10 Chassis or truck frames

Maximum diameter of 6.11″ to fit rotor hat.

Rotor Center = 2 3/4″ – Rotor Hat Section Inside Diameter = 6 3/16″ You will need to modify your axles if they will not fit inside the rotor
hat and you will need to modify the rotor if the center hole is too small for your axles.

.050×45 Degree Chamfer

2.786″ max register axle

Does not Fit 14″ Rims Must use 15″ or larger

When installing rear disc brake kit a disc/disc proportioning valve with a 1-1/8″ bore master cylinder will be needed.

This kit will push your wheels out an additional .125 per side, longer wheel studs may be required after installation of this kit

*Note: The emergency brake cables provided in the kit will fit 55 – 64 Full Size Chevrolet. Any other application will require the customer to modify the included cables to work with their application. The intermediate cable, center pull and cable couplers may not be necessary on 58 64 cars.